Corrosorber Liquid Hydrogen Sulfide Scavenger

HOMEFABRICCAREYELLOW

PRODUCT DESCRIPTION

  • Corrosorber Liquid is a concentrated solution of nitrogen based heterocyclic compound
  • It can be used to scavenge hydrogen sulfide (H2S), mercaptans, sulfides, and sulfur compounds from gas systems or liquid hydrocarbons
  • Corrosorber® liquid is a quickly reacting product allowing for lower levels of treated H2S where contact time is restricted

 

FEATURES

  • Fast, effective sulfide removal
  • Produces water-soluble polymer solutions
  • Can be used in gas, crude oil, or water
  • Formaldehyde free
  • Not adversely affected by the presence of carbon dioxide

 

APPLICATIONS

  • Hydrogen Sulfide is a poisonous gas that is deadly at high concentrations and provides serious health threats at moderate concentrations
  • Operating problems caused by H2S can include severe corrosion and fouling, and injection well plugging with iron sulfides
  • Corrosorber® Liquid is installed in batch reaction towers or it is injected continuously into gas gathering lines, transmission lines, vapor overheads, or liquid product systems of pipelines. It can be applied in either flowline or bubble tower applications
  • Typically the bubble tower should be filled to approximately 50% full to prevent the product from being carried downline
  • Corrosorber® Liquid can be diluted with water or methanol for ease of application. Water containing reacted product can be reused in the water cycle; including water gathering lines, water tanks, holding pits, vapor overheads, or injected down disposal wells

 

METHOD OF APPLICATION

  • The amount of Corrosorber® Liquid required depends upon the level of H2S in the system and the degree of reduction desired
  • As a general rule, each gallon of Corrosorber® Liquid will scavenge approximately 3.3 pounds of H2S per MMSCF
  • Typical field blend uses 30% Corrosorber® Liquid with 0-15% methanol in water
  • Additional methanol can be added to the product to meet specification application needs. This is particularly advantageous in wet gas systems where freezing is a problem

 

PACKAGING AND STORAGE

  • Corrosorber Liquid is available in:
    • 5 gallon (19 liter) pails
    • 55 gallon (208 liter) drums
  • Do not store above 120°F (49°C). Keep container closed and upright

For quotation and other information, Email: vcitech@vcimalaysia.com